HP StorageWorks Enterprise File Services WAN Accelerator - Manual (Page 62)

62 C ONFIGURING THE HP EFS WAN A CCELERATOR
NOTE: You were prompted to configure DNS when you completed the installation wizard.
This section describes how you can modify these settings.
To set the DNS server 1. Click the Setup tab to display the Setup menu.
2. Click Host Settings to expand the Host Settings menu.
3. Click DNS Settings to display the Host Settings - DNS Settings page.
Figure 2-20. Host Settings - DNS Settings Page
4. Use the controls to complete the configuration, as described in the following table.
5. Click Save to save your settings permanently or click Reset to return the settings
to their previous values.
Control Description
Name Servers Set one or more of the following:
• Primary DNS IP. Specify the IP address for the primary name server.
• Secondary DNS IP. Optionally, specify the IP address for the secondary name server.
• Tertiary DNS IP. Optionally, specify the IP address for the tertiary name server.
To apply your settings, click Set Name Servers.
Domain Search Add Domain. Specify the domain name and click Add Domain. If you specify domains
the HP EFS WAN Accelerator automatically finds the appropriate domain for each of the
hosts that you enter in the system.
Remove Selected Domain. To remove an entry, click the box next to the domain name
and click Remove Selected Domain.