HP StorageWorks Enterprise File Services WAN Accelerator - Manual (Page 91)

HP S TORAGE W ORKS EFS WAN A CCELERATOR M ANAGEMENT C ONSOLE U SER G UIDE 91
2 C
ONF
IGUR
ING
TH
E
HP
EF
S
WA
N
A
CC
EL
ERA
T
O
R
To set a service port 1. Click the Setup tab to display the Setup menu.
2. Click Advanced Networking to expand the Advanced Networking menu.
3. Click Service Ports to display the Advanced Networking - Service Ports page.
Figure 2-35. Advanced Networking - Service Ports Page
4. Use the controls to complete the configuration, as described in the following table.
5. Click Save to save your settings permanently or click Reset to return the settings
to their previous values.
Control Description
Add Service Port Service Port. Specify a port number. The default service ports are 7800 and 7810.
Add Port. Click Add Port to add the port to the service port list.
Set As Default Port. To set a port as the default port, select it and click Set As Default
Port.
Remove Selected Port. To remove an entry, select it and click Remove Selected Port.
Add Service Port Mapping Destination Port. Specify a destination port number.
Service Port. Specify a port number.
Add Mapping. Click Add Mapping to add a mapping to the mappings list.
Remove Selected Mappings. To remove an entry, select it and click Remove Selected
Mappings.