HP StorageWorks Enterprise File Services WAN Accelerator - Manual (Page 119)

HP S TORAGE W ORKS EFS WAN A CCELERATOR M ANAGEMENT C ONSOLE U SER G UIDE 119
2 C
ONF
IGUR
ING
TH
E
HP
EF
S
WA
N
A
CC
EL
ERA
T
O
R
5. Click Apply to apply your settings to the running configuration. (Apply your
settings to test a new configuration before saving them permanently.)
6. Click Save to save your settings permanently or click Reset to return the settings
to their previous values.
Setting SNMP
Parameters You set SNMP parameters in the Reports - SNMP Settings page.
By default SNMP parameters are not configured.
To set SNMP
parameters 1. Click the Setup tab to display the Setup menu.
2. Click Reports expand the Reports menu.
3. Click SNMP Settings to display the Reports - SNMP Settings page.
Figure 2-49. Reports - SNMP Settings Page
4. Use the controls to complete the configuration, as described in the following table.
SMTP Server SMTP Server. Specify a valid Simple Mail Transfer Protocol (SMTP) server. External
DNS and external access for SMTP traffic is required for this feature to function.
IMPORTANT: Make sure you provide a valid SMTP server to ensure that the users you
specify receive email notifications for events and failures.
SMTP Port. Specify a port number for the SMTP server.
Control Description
Control Description
System Contact Specify the user name for the SNMP contact.