HP StorageWorks Enterprise File Services WAN Accelerator - Manual (Page 124)

124 C ONFIGURING THE HP EFS WAN A CCELERATOR
4. Click Apply to apply your settings to the running configuration. (Apply your
settings to test a new configuration before saving them permanently.)
5. Click Save to save your settings permanently or click Reset to return the settings
to their previous values.
Setting Remote
Logging You set remote logging in the Logging - Remote Log Servers page.
Remote logging forwards HP EFS WAN Accelerator logs to a remote server you
specify.
Enabling this feature is optional.
To set up remote
logging 1. Click the Setup tab to display the Setup menu.
2. Click Logging to expand the Logging menu.
3. Click Remote Log Servers to display the Logging - Remote Log Servers page.
Figure 2-53. Logging - Remote Log Servers Page
4. Use the controls to complete the configuration, as described in the following table.
5. Click Save to save your settings permanently or click Reset to return the settings
to their previous values.
Control Description
Add Remote Syslog Server Server IP. Specify the IP address for the system log server (syslog).
Minimum Severity. Select a severity level from the drop-down list.
Add Server. Click Add Server to add the remote server to the Remote Syslog Server
list.
Remove Selected Servers. To remove an entry, click the check box next to the entry and
click Remove Selected Servers.