HP StorageWorks Enterprise File Services WAN Accelerator - Manual (Page 139)

HP S TORAGE W ORKS EFS WAN A CCELERATOR M ANAGEMENT C ONSOLE U SER G UIDE 139
2 C
ONF
IGUR
ING
TH
E
HP
EF
S
WA
N
A
CC
EL
ERA
T
O
R
Viewing
Scheduled Jobs You can view completed, pending, inactive jobs, as well as jobs that were not
completed because of an error in the Scheduled Jobs page.
Jobs are CLI commands that are scheduled to execute at a time you specify.
The only job you can schedule using the Management Console are software upgrades;
for all other jobs, you must use the CLI.
For detailed information about scheduling jobs using the CLI, see the HP
StorageWorks Enterprise File Services WAN Accelerator Command Line-Interface
Reference Manual.
To view scheduled
jobs 1. Click the Setup tab to display the Setup menu.
2. Click Scheduled Jobs to display the Scheduled Jobs page.
Figure 2-64. Scheduled Jobs Page
3. To remove an entry, click the check box next to the name and click Cancel/
Remove Selected Jobs.
4. Click Save to save your settings permanently or click Reset to return your settings
to their previous values.
Managing Configurations
You can save, activate, and import configurations in the Configuration Manager Page.
Each HP EFS WAN Accelerator has an active, running configuration and written,
saved configurations.
When you Apply your settings in the Management Console, the values are applied to
the active running configuration. but the values are not written to disk and saved
permanently.