HP StorageWorks Enterprise File Services WAN Accelerator - Manual (Page 157)

HP S TORAGE W ORKS EFS WAN A CCELERATOR M ANAGEMENT C ONSOLE U SER G UIDE 157
3 C
RE
AT
ING
HP EFS
W
A
N
A
CCE
LE
RAT
OR
R
EP
O
R
TS
AND
3. Use the controls to customize the report, as described in the following table..
Creating
Throughput
Reports The Performance: Throughput report summarizes the throughput or total data
transmitted for the application and time period specified.
The Performance - Throughput report includes the following table of statistics that
describe data activity for the application and the time period you specify.
What This Report
Tells You The Performance - Throughput report answers the following questions:
‹ What was the average throughput?
‹ What was the peak throughput?
‹ At what time did the peak throughput occur?
About Report
Graphs In bar-graph and line-graph reports, the x-axis (or tick mark) plots time, according to
the interval you select. The y-axis plots the metric of interest, such as gigabytes (GB)
of bandwidth, percent (%) of data reduction, connection counts, and the like.
A diamond icon above the top margin of the graph points to the value on the x-axis (the
time) at which the peak occurred.
Control Description
Period Select Last Hour, Last Day, Last Week, or Last Month from the drop-down list.
Response Select All, Local, Remote, or Delayed from the drop-down list. The default value is All.
Server Select the server for which you want to collect statistics from the drop-down list.
Resolution Select High, Medium, or Low from the Resolution drop-down list. High (small bars)
allows you to drill down to specific points in time, while Low (large bars) enables you to
count or compare aggregate values in the time interval.
Refresh Set a rate to refresh the report display:
• To refresh your report every 15 seconds, click 15 Seconds.
• To refresh your report every 30 seconds, click 30 Seconds.
• To turn off refresh, click Off.
NOTE: The refresh rate does not affect polling. Polling occurs every 5 minutes.
Printer icon To print your report, click the Printer icon in the upper right corner of the page.
Field Description
Average Throughput Over
Last Week Specifies the average amount of data transmitted.
95th Percentile Throughput
Over Last Week Specifies the 95th percentile for data activity. The 95th
percentile is calculated by taking the peak of the lower 95%
of inbound and outbound throughput samples.
Peak Throughput Over Last
Week Specifies the peak data transmitted in the time period
specified.
Peak Throughput Occured At Specifies when the peak data activity occurred.