HP StorageWorks Enterprise File Services WAN Accelerator - Manual (Page 172)

172 C REATING HP EFS WAN A CCELERATOR R EPORTS AND L OGS
NOTE: If the connection is in an unknown state, the line is greyed-out.
3. Use the controls to customize the report, as described in the following table..
NOTE: If you have the Secure-CIFS feature enabled (which disables Server Message Block
(SMB) signing), the Network - Current Connections report displays Protocol Error—this is an
expected response. For detailed information about enabling Secure-CIFS, see
“Configuring
CIFS Protocol Support” on page 31 .
Viewing the
Current
Connection
Details Report The Network - Current Connections: Connection Details report displays details about
the connected HP EFS WAN Accelerator such as the source and destination IP address,
the peer HP EFS WAN Accelerator, the inner local port, and so forth.
Control Description
Filter Specify an IP address or port number in the Filter text box to filter the report.
Type All. Specifies all established active connections.
• Established (Optimized) Only. Specifies the total established active connections.
• Half-Opened (Optimized) Only. Specifies the total half-opened active connections. A
half-opened connection is a TCP connection in which the connection has not been fully
established. Half-opened connections count toward the connection count limit on the
appliance because at any time they might become a fully opened connection. If you are
experiencing a large number of half-opened connections, you might consider a more
appropriately sized system.
• Half-Closed (Optimized) Only. Specifies the total half-closed active connections.
Half-closed connections are connections which the appliance has intercepted and
optimized but are in the process of becoming inactive. These connections are counted
toward the connection count limit on the appliance. (Half closed connections might
remain if the client or server does not close their connections cleanly.) If you are
experiencing a large number of half-closed connections, you might consider a more
appropriately sized system.
• Pass-Through Only. Specifies the total connections passed through, unoptimized
when the connection limit has been reached.
• Forwarded. Specifies the total number of connections that were forwarded when you
have configured a connection forwarding neighbor to manage the connection.
Printer icon To print your report, click the Printer icon in the upper right corner of the page.