HP StorageWorks Enterprise File Services WAN Accelerator - Manual (Page 58)

58 C ONFIGURING THE HP EFS WAN A CCELERATOR
5. Click Apply to apply your settings to the running configuration. (Apply your
settings to test a new configuration before saving them permanently.)
6. Click Save to save your settings permanently or click Reset to return the settings
to their previous values.
Setting
Auxiliary
Interfaces You set up an auxiliary interface, which provides support if your network has a
dedicated management subnet, in the Host Settings - Interface: AUX page. For
example, if your network has an auxiliary interface that connects and passes packets
between the HP EFS WAN Accelerator and a different network, such as one purely for
device management.
IMPORTANT: The primary and auxiliary interfaces cannot share the same network subnet.
The auxiliary and in-path interfaces cannot share the same subnet.
Enabling this interface is optional.
To set an auxiliary
interface 1. Click the Setup tab to display the Setup menu.
2. Click Host Settings to expand the Host Settings menu.
3. Click Interface: AUX to display the Host Settings - Interface: AUX page.
Figure 2-17. Host Settings - Interface: AUX Page