HP StorageWorks Enterprise File Services WAN Accelerator - Manual (Page 64)

64 C ONFIGURING THE HP EFS WAN A CCELERATOR
To map a host name to
an IP address 1. Click the Setup tab to display the Setup menu.
2. Click Host Settings to expand the Host Settings menu.
3. Click Hosts to display the Host Settings - Hosts page.
Figure 2-22. Host Settings - Hosts Page
4. Use the controls to complete the configuration, as described in the following table.
5. Click Save to save your settings permanently or click Reset to return the settings
to their previous values.
Setting Proxies You can specify a Web or FTP proxy in the Host Settings - Proxies page.
This proxy is used when a Uniform Resource Locator (URL) is specified in the
Management Console or the CLI. For example, the proxy is used in the Software
Upgrade page if you specify a URL from which to download the software image.
This setting applies only if you specify FTP or HTTP in the URL.
Control Description
Add New Host Host IP. Specify the IP address for the host.
Host name. Specify a host name.
Add Entry. Click Add Entry to add a host and IP address.
Remove Selected Hosts. To remove an entry, click the check box next to the name and
click Remove Selected Hosts.