HP StoreEver MSL Tape Libraries - Manual (Page 33)

Moving the rack rails and clip nuts
Using a #3 Phillips screwdriver, remove the rails from the rack. For an MSL4048 or MSL8096 also
remove the clip nuts.
Secure one rail to each side of the rack in the new location. Secure the front and the back of each
rail to the rack. The front of the rails is straight and the back is angled as shown in
Figure 14 .
Figure 14 Installing the MSL2024 and MSL4048 rack rails
.
HP StorageWorks MSL Library Extender user guide 33