HP StoreEver MSL Tape Libraries - Manual (Page 34)

Moving the clip nuts
For the MSL4048 and MSL8096, replace the clip nuts in the locations shown in Figure 15 , page 34.
MSL8096 MSL4048
Figure 15 Clip nut locations
.
2. Rail screw location 1. Clip nut location
4. U marker 3. Library bottom
Installing the Library in the rack rails
With assistance, slide the Library onto the metal rails as shown in Figure 16 , page 35. Secure the
front bezel to the rack using a #2 Phillips screwdriver placed through the small holes in the mounting
bracket to tighten the captive screws on each side of the Library.
CAUTION:
To avoid personal injury and damage to equipment, obtain adequate assistance to set the Library on
the rails.
Installing the Library Extender 34