HP StoreEver MSL Tape Libraries - Manual (Page 39)

Figure 24 Aligning the Libraries with the alignment gauge
.
Gently remove the alignment gauge without moving either of the Libraries. Save the alignment gauge
for future use if the Libraries are moved or the Extender is installed with other Libraries.
Installing the Extender
WARNING!
To avoid damage to the Libraries and Extender, verify that both Libraries are powered off before
installing the Extender.
To install the Extender:
1. Align the upper tab on the side of the Extender with the slot in the upper drive bay and slide the
Extender into the Libraries as shown in
Figure 25 , page 39.
Figure 25 Aligning the Extender with the upper drive bay
.
HP StorageWorks MSL Library Extender user guide 39