HP StoreEver MSL Tape Libraries - Manual (Page 53)

Solution Cause Message Sub-code
• Verify that the lower Lib-
rary is an HP Storage-
Works MSL2024 or
MSL4048 Tape Library.
The lower Library is not an HP
StorageWorks MSL2024 or
MSL4048 Tape Library.
Lower Library personality not
matching.
52
• Update the extended lib-
rary firmware with the cur-
rent firmware bundle,
which will update both Lib-
raries and the Extender
with compatible firmware
versions.
The firmware version of the
Extender is not compatible
with the firmware version of
the master Library.
Extender firmware not match-
ing.
53
• Disable extended mode,
update both Libraries to the
most recent released ver-
sions, and then re-enable
extended mode.
The firmware versions of the
master Library and lower Lib-
rary are not compatible with
each other.
Lower Library firmware level
not matching.
54
• Verify that the master (top)
Library is an MSL4048 or
MSL8096.
The master Library is not an
MSL4048 or MSL8096. Incompatible height form factor
for master Library.
55
• Verify that the lower Lib-
rary is an MSL2024 or
MSL4048.
The lower Library is not an
MSL2024 or MSL4048. Incompatible height form factor
for lower Library.
56
• Power cycle the master
Library. (The master Library
will attempt to download
the Extender firmware to
the Extender when the
master Library is powered
on.)
The firmware upgrade failed,
possibly because of a power
failure during the upgrade
operation.
Extender firmware corrupted 57
Additional robotic error sub-codes
The following sub-codes are associated with robotics errors (error 0x80 to 0xA6), which are described
in the HP StorageWorks MSL2024, MSL4048, and MSL8096 Tape Libraries user and service guide.
See
Table 10 .
Table 10 Sub-codes related to Library robotics errors during movement to extender position
Message Sub-code
Invalid stack configuration (1/8 G2 Tape Autoloader cannot be part of an extended
library.)
F0
Error during elevator home movement F1
Error during sled movement to home sensor F2
Error during sled movement to extender position F3
Error during rotation movement to extender position F4
HP StorageWorks MSL Library Extender user guide 53