HP StoreEver MSL Tape Libraries - Manual (Page 61)

3.
CAUTION:
Removing the top of the Extender will require its replacement. Only remove the top of the
Extender to retrieve a cartridge when all other removal attempts have failed.
To remove a cartridge that is stuck in the back of the Extender:
a. Using a #2 Phillips screwdriver, loosen the six screws marked with arrows on the sheet metal
on top of the Extender.
b. Remove the top sheet metal.
c. Remove the cartridge.
d. Replace the sheet metal and tighten the screws.
Repackaging the Library Extender
IMPORTANT:
Shipping the Extender without properly repackaging it can damage the Extender.
Follow these steps to package the removed Library Extender for storage or shipment.
To package the removed Library Extender for storage or shipment:
1. Insert the cardboard support in the space between the top and bottom of the extender.
2. Place the extender on the base position of the cardboard wrapper.
HP StorageWorks MSL Library Extender user guide 61