HP Designjet T7100 Printer series User Manual
Page 100
●
Check that you have paper wide enough to print all of your jobs. Any jobs that are too wide may
be put “on hold for paper” if the paper mismatch action is set to Put job on hold (see
●
Check the ink levels remaining in your ink cartridges.
●
When you have submitted your print jobs, you can use the Embedded Web Server from a remote
location to monitor their status.
●
Drying time should be set to Automatic.
●
For high throughput, select the Setup menu icon
, then Printing preferences > Paper
options > Roll switching options > Minimize roll changes or Use roll with less
paper.
●
For economical use of paper, select the Setup menu icon
, then Printing preferences >
Paper options > Roll switching options > Minimize paper waste and Autorotate
On.
92
Chapter 8 Print options
ENWW
Pri
nt opti
ons