HP Designjet T7100 Printer series - Manual (Page 211)

Memory specifications
Table C-8 Memory specifications
T7100 & T7100 Mono memory (DRAM) 1024MB
T7100ps & T7100ps Mono memory (DRAM) 1536MB
Hard disk 160GB
External hard disk accessory 160GB
Power specifications
Table C-9 Printer power specifications
Input voltage 100–127 Vac / 220–240 Vac ±10%, autoranging
Frequency 50–60 Hz
Current 5 A / 3 A
Power consumption 270 W maximum
Environmental specifications
Table C-10 Printer environmental specifications
Relative humidity range for best print quality 20–80%, depending on paper type
Temperature range for best print quality 15 to 30°C (59 to 86°F), depending on paper type
Temperature range for printing 5 to 40°C (41 to 104°F)
Temperature range when not in operation –20 to +55°C (–4 to +131°F)
Maximum altitude when printing 3000 m
NOTE: If the printer or ink cartridges are moved from a cold location to a warm and humid location,
water from the atmosphere can condensate on the printer parts and cartridges and can result in ink
leaks and printer errors. In this case, HP recommends that you wait at least 3 hours before turning on
the printer or installing the ink cartridges, to allow the condensate to evaporate.
Acoustic specifications
Table C-11 Printer acoustic specifications
Idle sound power ≤ 5.8 B (A)
Operating sound power ≤ 7.0 B (A)
Idle sound pressure ≤ 38 dB (A)
Operating sound pressure ≤ 53 dB (A)
ENWW Memory specifications 203
Prin
ter specifications