HP Designjet T7100 Printer series - Manual (Page 45)

Return to the default calibration
Returning to the default calibration sets all the paper-advance calibration to zero. To return to the
default paper advance-calibration value, you must reset the calibration.
1.
On the front panel, select the icon, and then select Image quality maintenance >
Paper advance calibration > Reset paper advance.
2. Wait until the front panel shows that the operation has been successfully completed before you
press the Back button to return to the Ready screen.
Download paper presets
Each supported paper type has its own characteristics. The printer changes the way it prints on each
different paper type. For example, some might need more ink and some might require a longer drying
time. The printer requires a description of the requirements of each paper type. This description is
called the “paper preset”.
The paper preset contains the ICC profile, which describes the color characteristics of the paper. It also
contains information about other characteristics and requirements of the paper that are not directly
related to color. Existing paper presets for your printer are installed in the printer's software.
Your printer contains paper presets for only the most commonly used paper types. If you buy a paper
type for which your printer has no preset, you cannot select that paper type in the front panel.
You can assign a preset for a new paper type in three ways:
● Use an HP factory paper preset by selecting the closest category and type on the front panel or in
the HP Utility
NOTE: Because colors might not be accurate, this method is not recommended for high-quality
prints.
● Go to http://www.hp.com/go/designjet/downloads and click the HP Designjet ICC/Paper
presets and PANTONE tables link. Select from the HP Designjet paper presets drop-
down menu.
NOTE: HP provides presets for HP paper types only. If you do not find the paper preset that you
want on the Web, it might have been added to the latest firmware for your printer. Check the
firmware release notes for information. See Update the printer firmware on page 144 .
Cancel the drying time
Press the Form Feed and Cut button on the front panel.
CAUTION: A print that has not dried sufficiently can suffer from quality problems.
Change the drying time
You can use the HP Utility to change the drying time for a particular paper type, to accommodate
special printing conditions.
1. Open the HP Color Center.
2. Select Paper preset management.
ENWW Download paper presets 37
Handle the paper