HP Designjet T7100 Printer series - Manual (Page 159)

● The borders of colored blocks are wrongly colored.
To correct this kind of problem:
1. Reseat the printheads by removing them and then reinserting them. See Remove a printhead
on page 51 and Insert a printhead on page 54 .
2. Align the printheads. See Align the printheads on page 59 .
Lines are discontinuous
If your lines are broken in the following way:
1. Check that you are using appropriate print-quality settings. See Print options on page 77 .
2. Reseat the printheads by removing them and then reinserting them. See Remove a printhead
on page 51 and Insert a printhead on page 54 .
3. Align the printheads. See Align the printheads on page 59 .
Lines are blurred
ENWW Lines are discontinuous 151
Tr
ou
bleshoot image
s