HP Designjet T7100 Printer series - Manual (Page 97)

● You may be able to save some paper by using the following options:
◦ In the Windows driver dialog: select the Features tab and then Remove Blank
Areas and/or Rotate by 90 degrees or Autorotate.
◦ In the Mac OS Print dialog: select the Finishing panel, then Remove Blank Areas
and/or Rotate by 90 degrees or Autorotate.
◦ On the Embedded Web Server's Submit Job page: select Advanced settings >
Roll options > Remove blank areas and/or Rotate.
● If you check the print preview on your computer before printing, you can sometimes avoid wasting
paper on prints containing obvious mistakes. See Preview a print on page 85 .
The Remove Blank Areas option removes blank areas from the top and bottom of the print, so that
less paper is used in printing. If you are using HP-GL/2, this option also removes blank areas from the
sides of the print.
Nest jobs to save paper
Nesting means automatically printing images or document pages side by side on the paper, rather than
one after the other. This is done to avoid wasting paper.
1. Direction of paper flow
2. Nesting off
3. Nesting on
4. Paper saved by nesting
How to use nesting
Here are some general guidelines for using nesting:
● To enable nesting, use the front panel (Job Management menu) or the Embedded Web Server
(Setup tab).
● If you are working with batches of jobs with the same format, choose nesting In order. This will
close the nest as the first file with a new format arrives.
ENWW Nest jobs to save paper 89
Print o
p
tio
ns