HP Designjet Z6200 Photo Printer - Manual (Page 117)

●
On the front panel: select the icon, and then select Printing preferences > Color
options > Emulate Printer.
● Through the Embedded Web Server: select the Submit Job page, and then Job settings >
Advanced settings > Color > Color management and the desired emulation mode.
You can emulate the following printers:
● HP Designjet 5500 Dye series
● HP Designjet Z6100
The following table shows approved combinations of print-quality settings and papers for the best
printer-emulation results.
Best Normal Fast
HP Premium Instant-Dry Gloss Photo Paper Yes Yes No
HP Universal Instant-Dry Photo Gloss Yes Yes No
HP Heavyweight Coated Paper Yes Yes Yes
HP Coated Paper Yes Yes Yes
HP Bright White Inkjet Bond Paper Yes Yes Yes
CMYK color emulation
All CMYK emulation options apply to PDF, PostScript, TIFF, and JPEG files only.
A traditional workflow defines color in the CMYK space. For best results, the colors must be adjusted to
the printer, because different printers will produce different colors from the same CMYK data. If the
image file that you are printing was not created specifically for your printer, it will require some
readjustment, which can be done using one of the following options provided with your printer:
● None (Native): no emulation. The printer will use its default internal conversion from CMYK to
RGB, without following any color standard. This does not imply that results will be bad.
● ISO Coated 2-ECI is based on the characterization dataset FOGRA39L.txt, applicable to the
following reference printing conditions according to the international standard ISO
12647-2:2004/Amd 1: commercial and specialty offset, paper type 1 and 2, gloss or matt
coated paper, positive plates, tone value increase curves A (CMY) and B (K), white backing.
● Coated GRACoL 2006-ISO12647 provides GRACoL proofing and printing on Grade 1
coated paper, ISO 12647-2 Paper type 1.
● PSO Uncoated ISO12647-ECI is based on the characterization data set FOGRA47L.txt,
applicable to the following reference printing condition according to the international standards
ISO 12647- 2:2004 and ISO 12647-2:2004/Amd 1:2007: commercial and specialty offset,
paper type 4, uncoated white paper, positive plates, tone value increase curves C (CMY) and D
(K), white backing.
● PSO LWC Improved-ECI is based on the characterization data set FOGRA45L.txt, applicable
to the following reference printing condition according to the international standards ISO
12647-2:2004 and ISO 12647-2:2004/Amd 1:2007: commercial and specialty offset,
improved LWC paper (light weight coating), positive plates, tone value increase curves B (CMY)
and C (K), white backing.
ENWW Color emulation modes 109
Color management