HP Designjet Z6200 Photo Printer - Manual (Page 123)

Identify a job in the queue
The best way to look at the queue is in the Embedded Web Server (Main tab > Job queue), where
you can manage the queue and get full information on every job (by clicking the name of the file).
However, you can also manage the queue from the front panel. To do so, select the Job Queue icon
, then Job queue, where you can see a list of the jobs in the queue.
Each has an identifier, comprising:
<position in queue>: <image name>
The job currently being printed has a pointing hand icon, jobs already printed have a check mark,
canceled jobs have crosses, processing jobs have a clock and jobs on hold have a warning.
Prioritize a job in the queue
To make any job in the queue the next one to be printed, select it and choose Reprint (in the
Embedded Web Server) or Move to front (in the front panel).
If nesting is turned on, the prioritized job may still be nested with others. If you really want this job to
be printed next, and on its own on the roll, first turn nesting off and then move it to the front of the
queue as described above.
Delete a job from the queue
Under normal circumstances, there is no need to delete a job from the queue after printing it, as it is
removed from the queue as more files are sent. However, if you have sent a file in error, and want to
avoid any chance of it being reprinted, you can simply delete it, by selecting it and choosing Delete
(in the Embedded Web Server or in the front panel).
In the same way, you can delete a job that has not been printed yet.
If the job is currently being printed (Status = printing in the Embedded Web Server, or it is the first job
in the queue in the front panel), and you want both to cancel the job and to delete it, first click the
Cancel icon in the Embedded Web Server, or press the Cancel key on the front panel, and then delete
it from the queue.
Reprint or copy a job in the queue
To reprint or make extra copies of any job in the queue, select the job in the Embedded Web Server
and click the Reprint icon, then specify the number of copies you want. The job is moved to the top of
the queue. To make more than one print of a non-printed job in the queue from the front panel, select
the job and choose Copies, then specify the number of copies required and press the
Select key. This
overrides any value set by your software.
NOTE: If Rotate was On when you sent the file, every copy is rotated.
You can reprint an already-printed job from the front panel. Select the Job Queue menu icon , then
select the job from the queue, then select Reprint.
ENWW Identify a job in the queue 115
Job queue