HP Designjet Z6200 Photo Printer - Manual (Page 142)

4. With the same dry brush, remove ink deposits from the platen surface.
5. Use a clean, absorbent lint-free cloth that has been slightly dampened with isopropyl alcohol to
wipe loosened ink deposits from the platen.
CAUTION: Do not use commercial cleaners or abrasive cleaners. Do not wet the platen directly,
because you will leave too much moisture behind.
6. Use the damp cloth to clean the cutter ramp.
7. Use a dry cloth to clean the exposed part of the wheels. Ideally, you should clean the entire
circumference of these wheels.
134 Chapter 11 Maintain the printer ENWW
Maintain the printer