HP Designjet Z6200 Photo Printer - Manual (Page 36)

Select paper mismatch action
If the paper currently loaded in the printer is not suitable for a particular job, the printer can either put
the job on hold until some suitable paper is loaded, or it can ignore the problem and print the job on
the unsuitable paper. There are two ways in which the loaded paper may be considered unsuitable:
● The paper type is not as specified for the job
● The paper size is smaller than specified for the job
You can set the printer's behavior in such cases from the front panel.
●
Select the Setup menu icon , then Job management options > Select paper
mismatch action > Print anyway if you want such jobs to print on whatever paper is
loaded. This is the default option.
●
Select the Setup menu icon , then Job management options > Select paper
mismatch action > Put job on hold if you want such jobs to be put on hold. The printer will
send an alert whenever a job is put on hold.
When a job is put on hold for paper, it is kept in the printer queue until some suitable paper is loaded
(in which case, all jobs waiting for that paper type can be printed). Meanwhile, other jobs with
different requirements can continue printing.
28 Chapter 3 Personalize the printer ENWW
Personal set
tings