Drying time, Supported paper types – HP Designjet Z6200 Photo Printer User Manual
Page 39
●
Make sure that the appropriate print-quality setting (Best, Normal, or Fast) is selected. You can set
the print quality in the driver, in the Embedded Web Server, or on the front panel. Driver or
Embedded Web Server settings override front panel settings. The combination of paper type and
print-quality settings tells the printer how to place the ink on the paper—for example, the ink
density and halftoning method. See
Select print quality on page 82
●
Although the ink systems that are supplied with this printer have good light-fastness, colors will
eventually fade or change if exposed to sunlight over a long period of time
●
If the paper type shown on the front panel does not correspond to the paper that you intend to
use, take one of the following actions:
◦
Reload the roll into the printer and select the correct paper type. See
Load a roll into the printer on page 36
◦
Use the Embedded Web Server or the HP Utility to reconfigure the paper type for the roll.
◦
At the printer's front panel, select the
icon, then Change active paper type.
NOTE:
The paper advance calibration is not performed when the paper type is changed
from the front panel.
Drying time
With some paper types and under certain environmental conditions, the ink needs some time to dry
before the paper is unloaded. The following settings are available for each paper type:
●
Automatic: the printer automatically determines the appropriate drying time, based on the paper
you have selected and the current temperature. If any drying time is required, a “drying time to
go” countdown appears on the front panel.
●
Extended: the default drying time is extended. This can be used if you find that the default
drying time is sufficient to dry the ink.
●
Reduced: the default drying time is reduced. This can be used if you want to get prints as fast as
possible, and you find that the reduced drying time causes no significant problem in your
environment.
●
None: no drying time is provided. This can be used, for example, if you are manually removing
the prints as quickly as the printer is producing them.
●
Manual: this allows you to specify the drying time (in seconds).
To change the drying time, see
Change the drying time on page 49
.
Supported paper types
The following table lists the most common paper types that are suitable for use with your printer, and
shows the name that you should select on the front panel when loading each paper type. If you want to
use an HP paper that does not appear on the front panel, go
download the appropriate paper preset. You need to download a preset only once;
the printer stores it for future use and it subsequently appears in the front panel .
For the part numbers, widths, and weights of these papers, see
.
NOTE:
This list is likely to change over the course of time. For the latest information, visit
.
ENWW
Overview
31
Handle the paper