Insert an ink cartridge, Insert an – HP Designjet Z6200 Photo Printer User Manual
Page 70
5.
Lift the cartridge out of its drawer.
NOTE:
Avoid touching the end of the cartridge that is inserted into the printer, because the
connection might be coated with ink.
NOTE:
If necessary, store a partially-used ink cartridge in the same position as if it were inserted
in the printer. Avoid using a partially-used cartridge that has been stored on its end.
6.
The front-panel display identifies the missing ink cartridge.
Insert an ink cartridge
1.
Pick up the new ink cartridge and find the label that identifies the ink color. Hold the ink cartridge
so that you can see the label at the top of the side that is facing you.
2.
Check that the colored label above the empty slot in the printer matches the color of the label on
the cartridge.
3.
Shake the cartridge vigorously for about 15 seconds.
4.
Insert the ink cartridge into the cartridge drawer.
62
Chapter 5 Handle the ink system
ENWW
Handle t
h
e ink system