HP StoreEver TapeAssure Software - Manual (Page 21)

Using the graphical user interface
Starting L&TT
To start L&TT, log on as administrator and do one of the following:
•
Double-click the L&TT icon on the desktop (if present).
•
Click Start > Programs > HP Library and Tape Tools > HP L&TT.
Using the Scan Mode selection feature
When L&TT starts, the Startup screen opens. The Startup screen gives you the opportunity to exit
the application if it was started unintentionally and before any SCSI bus activity occurs. This prevents
the program from interfering with any backup or other storage applications that currently may be
running.
Figure 1 L&TT Startup screen
Using the graphical user interface 21