HP StoreEver TapeAssure Software - Manual (Page 92)

the saved_scan.txt file in the L&TT root directory. Examine
this file to determine the proper format. This parameter is
required.
testname Enter the test name to perform. The test names for the
supported tests are:
•
Connectivity Test
•
Device Analysis
•
Device Self Test
•
LTO Drive Assessment test
•
SDLT Drive Assessment Test
•
DDS Drive Assessment Test
•
LTO Media Assessment test
•
DDS Media Assessment test
For the proper syntax, see the Command line syntax entry for
the desired command in
Diagnostic tests (page 99) . This
parameter is required.
iohistory Optional. Specify enabled or disabled. When enabled,
L&TT generates a detailed event log that captures all L&TT
diagnostic interaction, all SCSI commands sent and received
by the program, and any software interactions or issues. If an
invalid value is provided, L&TT retains the existing setting.
testopt Optional. A test may have one or more options, or no options.
The Allow Overwrite test option must be set to True for
any test that writes data to a tape and is executed through the
command line.
For each option that you want to specify, enter the option
name/value pair in the following format:
testopt=<option1_name:option1 value>
testopt=<option2_name:option2 value> etc...
For more information about available options, valid values,
and command line syntax, see the desired command in
Diagnostic tests (page 99) .
instname Specify a name for this instance of L&TT. This parameter is
optional for the first instance of L&TT and required for all other
instances of L&TT. If this parameter is supplied, the log files
from this instance will be created in a logs_<instance
name>
folder in the logs folder of the L&TT installation directory
or directory specified by dirpath.
dirpath Specify the absolute path for the temporary directory used by
L&TT for its runtime files. This parameter is optional when L&TT
is run from the system installation directory and required when
L&TT is run from removable media, such as a USB flash drive
or CD.
When running L&TT from the system installation directory, if
dirpath
is specified and instname is not specified, the
L&TT runtime files will be created in the dirpath directory.
Otherwise, if dirpath is specified, the L&TT runtime files will
be created in <dirpath>/logs_<instance name>.
92 Command line functionality