HP 3000 Enterprise Virtual Array - Manual (Page 112)

Storage System Hardware Components
112 Enterprise Virtual Array 3000 User Guide
Operator Control Panel
The operator control panel (OCP) provides a direct interface to each controller.
From the OCP you can display storage system status and configuration
information, shut down the storage system, and manage the password.
The OCP includes a 40-character LCD alphanumeric display, four pushbuttons,
and status LEDs. See
Figure 50 .
Command View EVA is the tool you will typically use to display storage system
status and configuration information or perform the tasks available from the OCP.
However, if Command View EVA is not available, the OCP can be used to
perform these tasks.
Figure 50: Controller OCP
Status LEDs
The status LEDs indicate the operating status of the controller, as described in
Table 23 . During initial setup, the status LEDs may not be fully operational.
1
Status LEDs (see “ Status
LEDs ” on page 112)
2
40-character LCD
alphanumeric display (see
“ Alphanumeric LCD ” on
page 114)
3
Pushbuttons (see
“ Displaying the OCP Menu
Tree ” on page 114)
CXO7638A
1 2 3