HP 3000 Enterprise Virtual Array - Manual (Page 153)

Regulatory Notices and Specifications
153 Enterprise Virtual Array 3000 User Guide
Table 32 and Table 33 define the output voltage and current specifications of the
power supply.
Table 32: Output Voltage and Current Specifications
Specification
Range
Minimum Nominal Maximum
+5.1 VDC
Initial Voltage
Steady state current
+5.13 VDC
1.0 A
+5.18 VDC
N/A
+5.23 VDC
26.0 A
+12.2 VDC (Disk Drive Voltage)
Initial Voltage
Steady state current
+12.13 VDC
1.0 A
+12.25 VDC
N/A
+12.37 VDC
26.0 A
+12.5 VDC (Blower Voltage)
Initial Voltage
Steady state current
+12.25 VDC
0.0 A
+12.50 VDC
N/A
+12.75 VDC
2.0 A
Table 33: Dual Power Supply Configuration Power Specifications
Voltage Current (A) Power (W)
Maximum Continuous Current
+5.1 VDC (with a minimum +12.2 VDC load of
0 A)
+12.2 VDC (with a minimum +5 VDC load of 4 A)
+12.5 VDC
26.0 A
28.0 A
2.0 A
132 W
342.0 W
25.0 W
Total 499.0 W
Maximum Peak Current (Simultaneous Seek Activity)
+5.1 VDC
+12.2 VDC
+12.5 VDC
26.0 A
43.0 A
2.0 A
132.0 W
524.0 W
25.0 W
Total 681.0 W