HP 3000 Enterprise Virtual Array - Manual (Page 119)

Storage System Hardware Components
119 Enterprise Virtual Array 3000 User Guide
Shutting Down the Storage System
Caution: To power off the storage system for more than 96 hours, use
Command View EVA. Command View EVA posts any data in write cache to
disk before shutting down the storage system, thereby avoiding data loss if the
batteries discharge.
The Shutdown System menu is used to perform the following procedures:
■ Restarting the storage system. See “ Restarting the Storage System ” on
page 121.
■ Turning Off the power. See “ Powering Off the Storage System ” on page 122.
■ Uninitializing the storage system. See “ Uninitializing the Storage System ” on
page 123
.
Note: To ensure that you do not inadvertently activate a shutdown procedure, you will
be prompted to confirm your selection.
3. Press
T
or
S
until the desired Versions
Menu option is selected.
Versions Menu
VCS
4. Press
X
to display the version information
for the selected option.
Versions Menu
OCP