HP 3000 Enterprise Virtual Array - Manual (Page 120)

Storage System Hardware Components
120 Enterprise Virtual Array 3000 User Guide
Table 25: Shutdown Procedures
LCD Prompt Description
RESTART This procedure establishes communications between the storage
system and Command View EVA.
This procedure is used to restore the controller to an operational
state where it can communicate with Command View EVA.
POWER OFF This procedure initiates the sequential removal of controller power.
This ensures no data is lost.
The reasons for implementing this procedure include replacing a
disk drive enclosure.
SYSTEM
UNINITIALIZE
This procedure will cause the loss of all data. For a detailed
discussion of this procedure, see “ Uninitializing the Storage System ”
on page 123.