HP 3000 Enterprise Virtual Array - Manual (Page 133)

Storage System Hardware Components
133 Enterprise Virtual Array 3000 User Guide
Rack System/E Power Distribution Components
AC power is distributed to the Rack System/E rack through Power Distribution
Units (PDU) mounted on the two vertical rails in the rear of the rack. Up to four
PDUs can be mounted in the rack—two mounted on the right side of the cabinet
and two mounted on the left side. The PDU locations are shown in
Figure 60 .
Each of the PDU power cables has an AC power source specific connector. The
circuit-breaker-controlled PDU outputs are routed to a group of ten AC
receptacles. The storage system components plug directly into the PDUs.
1
PDM 4
2
PDM 3
3
PDM 2
4
PDM 1
5
PDU 1
6
PDM 8
7
PDM 7
8
PDM 6
9
PDM 5
-
PDU 2
Figure 59: Enterprise Rack AC power distribution
CXO7965A
1
2
3
4
5
6
7
8
9
10