HP StorageWorks XP Remote Web Console Software - Manual (Page 69)

1. Find the error code from the logs displayed on the RAID Manager window.
Figure 30 (page 69) shows an example of a log displayed on the RAID Manager window.
Figure 30 Example of a Log Displayed on the RAID Manager Window
Error codes appear to the right side of SSB=. The last four digits of the alphanumeric characters
that appear to the left of the comma (,) indicate SSB1 (for example, B9E1). The last four
alphanumeric characters that appear to the right of the comma (,) indicate SSB2 (for example,
B901
).
2. See Table 17 (page 70) and find the meaning of the error code.
For details about the error codes that are not described in Table 17 (page 70) , contact HP
technical support (see “Calling HP Technical Support” (page 76) ).
Troubleshooting When Using RAID Manager 69