HP Network Scanjet 5 Scanner series - Manual (Page 122)

Installing PaperPort Viewer for Windows
To run PaperPort Viewer for Windows, you need the following software
and hardware:
•
IBM or 100%-compatible personal computer with a 386 or higher
microprocessor
•
Windows 3.1 or later
•
4 MB of memory
•
1 MB of hard disk space
•
VGA monitor or better
To install the PaperPort Viewer on your workstation
1 Start Windows.
2 Choose Run from the Program Manager File menu and enter the
drive and path information (for example, type
N:\PAPRVIEW\PAPRVIEW.EXE in the Run box). The first time
you start a shared copy of PaperPort Viewer from a workstation, it
displays a message asking if you want to complete the workstation
installation.
3 Choose Install Viewer to complete the installation. A message
indicates when the workstation installation is complete.
4 Click OK to close the message.
You are now running PaperPort Viewer for Windows. If you do not want
to use PaperPort Viewer now, close the Open dialog box, and quit the
application.
122 Installing the PaperPort Viewer
EN