HP Network Scanjet 5 Scanner series - Manual (Page 24)

Selecting Your Settings at the Control Panel
Before scanning a document, at the control panel select the destination,
type of image being scanned, and the paper size.
N o t e At any point before you begin scanning, you can press the back arrow
on the keypad to return to the previous menu or you can press
[Abort] to
return to the main menu and start over.
To select the control panel settings
1 At the opening screen display on the scanner control panel, type your
user name on the keypad (this is the name the network administrator
used to register you for the scanner). Figure 5 is the screen that appears
when the printer is configured. Figure 6 is the screen that appears when
no printer is configured.
Figure 5
Figure 6
24 Using the Scanner
EN