HP Network Scanjet 5 Scanner series - Manual (Page 22)

Loading a Document
Load your document in either the
automatic document feeder or on the
scanner glass, as described in the
following procedures.
To load a document in the ADF
1 Make sure there isn’t any paper on
the scanner glass.
2 Place the document (up to 50 pages)
face up on the document tray with the
top of the document near the feeder
cover and the side of the document
against the paper guide with the
arrows.
3 Adjust the document guide to touch
the left side of the paper stack.
4 Align the bottom edge of the paper
stack with the correct paper size
mark. Sliding the paper too far under
the feeder cover can cause paper
misfeeds.
22 Using the Scanner
EN