HP 3PAR Operating System Software - Manual (Page 12)

Part I Setting the Foundation for Remote Copy
“Planning Your Remote-Copy Setup Strategy” (page 13) 1. Plan your setup strategy.
“Selecting a Remote-Copy Configuration” (page 16) 2. Select a remote-copy configuration.
“Selecting Network Connections” (page 23) 3. Select a network connection type.
“Requirements” (page 13) 4. Review the requirements and restrictions to make sure the
system is prepared for remote-copy configuration.
See also:
• “N-to-1 Remote-Copy Considerations” (page 43)
• “1-to-N Remote-Copy Considerations” (page 44)
• “SLD Remote-Copy Considerations” (page 56)
“Gathering Setup Information” (page 25) 5. Obtain and organize the information about your network.
“Setting the Transport Layer” (page 26) 6. Configure the remote-copy transport layer.
When you have set the foundation for your remote-copy system, continue to “Setting Up the Remote Copy
Servers” (page 39) .