HP 3PAR Operating System Software - Manual (Page 237)

3. Verify the reversal of volume group roles:
a.
Issue the showrcopy command on the failover system (SystemC).
b. In the Group Information area, check that:
•
the Role column for the reversed volume group displays Primary-Rev (primary
as a result of reversal)
•
the SyncStatus column of the virtual volumes displays Synced
The following example of the showrcopy command output on SystemC shows that the
Role
of multi.1.r96 is now Primary-Rev in relation to both SystemA and SystemB:
# showrcopy
Remote Copy System Information
Status: Started, Normal
Target Information
Name ID Type Status Options Policy
SystemA 42 IP failed mirror_config
SystemB 44 IP ready mirror_config
Link Information
Target Node Address Status Options
SystemA 0 10.100.33.96 Down
SystemA 1 10.101.33.96 Down
SystemB 0 10.100.33.195 Up
SystemB 1 10.101.33.195 Up
receive 0 receive Up
receive 1 receive Up
Group Information
Name Target Status Role Mode Options
multi.1.r96 SystemA Stopped Primary-Rev Periodic Period 5m, over_per_alert
LocalVV ID RemoteVV ID SyncStatus LastSyncTime
testvv.0 300 testvv.0 100 Stale 2009-06-29 14:32:01 PDT
testvv.1 301 testvv.1 101 Stale 2009-06-29 14:32:06 PDT
testvv.2 302 testvv.2 102 Stale 2009-06-29 14:32:03 PDT
testvv.3 303 testvv.3 103 Stale 2009-06-29 14:32:02 PDT
Name Target Status Role Mode Options
multi.1.r96 SystemB Started Primary-Rev Periodic Period 5m, over_per_alert
LocalVV ID RemoteVV ID SyncStatus LastSyncTime
testvv.0 300 testvv.0 200 Synced 2009-06-29 14:39:42 PDT
testvv.1 301 testvv.1 201 Synced 2009-06-29 14:39:39 PDT
testvv.2 302 testvv.2 202 Synced 2009-06-29 14:39:41 PDT
testvv.3 303 testvv.3 203 Synced 2009-06-29 14:39:42 PDT
c. Issue the showrcopy command on the synchronous backup system (SystemB).
The following example shows the showrcopy command output for SystemB:
Failing Over to the Asynchronous Periodic Backup System (No Data Transfer) 237