HP PSC 2350 All-in-One Printer - Manual (Page 37)

2 Insert the stack of cards into the far right side of the paper tray with the short edge
forward and the print side down. Slide the stack of cards forward until it stops.
3 Squeeze and hold the tab on the top of the paper-width guide, then slide the
paper-width guide inward against the stack of cards until it stops.
Do not overload the paper tray; make sure the stack of cards fits within the paper
tray and is no higher than the top of the paper-width guide.
Load envelopes
You can load one or more envelopes into the paper tray of your HP all-in-one. Do not
use shiny or embossed envelopes or envelopes that have clasps or windows.
Note For specific details on how to format text for printing on envelopes, consult the
help files in your word processing software. For best results, consider using a
label for the return address on envelopes.
To load envelopes
1 Remove all paper from the paper tray.
2 Insert one or more envelopes into the far right side of the paper tray with the
envelope flaps up and to the left. Slide the stack of envelopes forward until it stops.
Tip For more help on loading envelopes, refer to the diagram engraved in the
base of the paper tray.
3 Squeeze and hold the tab on the top of the paper-width guide, then slide the
paper-width guide inward against the stack of envelopes until it stops.
Do not overload the paper tray; make sure the stack of envelopes fits within the
paper tray and is no higher than the top of the paper-width guide.
Load other types of paper
The following table provides guidelines for loading certain types of paper. For best
results, adjust the paper settings each time you change paper sizes or paper types. For
information on changing paper settings, see the onscreen HP Image Zone Help.
Chapter 5
34 HP PSC 2350 series all-in-one
Load
originals
and
load
paper