HP PSC 2350 All-in-One Printer - Manual (Page 65)

Note The menus shown in this section may vary in content depending on your
computer's operating system and which applications you set up as scan
destinations in the HP Image Zone.
1 Load the original face down on the right front corner of the glass.
2 In the Scan area, press Scan To .
The Scan To menu appears, listing destinations, including applications, for
anything you scan. The default destination is whichever one you selected the last
time you used this menu. You designate which applications and other destinations
appear on the
Scan To menu by using the HP Image Zone on your computer.
3 To select an application to receive the scan, press its number on the control panel
or use the arrow keys to highlight it and then press
OK or Start Scan .
A preview image of the scan appears in the HP Scan window on the computer,
where you can edit it.
For more information about editing a preview image, see the onscreen HP Image
Zone Help that came with your software.
4 Make any edits to the preview image in the HP Scan window. When you have
finished, click Accept.
The HP all-in-one sends the scan to the selected application. For example, if you
chose the HP Image Zone, it automatically opens and displays the image.
The HP Image Zone has many tools that you can use to edit your scanned image. You
can improve the overall image quality by adjusting the brightness, sharpness, color
tone, or saturation. You can also crop, straighten, rotate, or resize the image. When the
scanned image looks just the way you want it, you can open it in another application,
send it through e-mail, save it to a file, or print it. For more information about using the
HP Image Zone, see the HP Gallery section in the onscreen HP Image Zone Help.
Send a scan to an HP Instant Share destination
HP Instant Share lets you share your photos with family and friends through e-mail
messages, online photo albums, and high-quality prints.
For information on using HP Instant Share, see the onscreen HP Image Zone Help.
Send a scan to a memory card
You can send the scanned image as a JPEG image to the memory card that is currently
inserted in one of the memory card slots on the HP all-in-one. This enables you to use
the memory card features to generate borderless prints and album pages from the
scanned image. It also enables you to access the scanned image from other devices
that support the memory card.
1
Load the original face down on the right front corner of the glass.
2 In the Scan area, press Scan To .
A Scan To menu appears, listing various options or destinations. The default
destination is whichever one you selected the last time you used this menu.
3 Press the number next to Memory Card .
The HP all-in-one scans the image and saves the file to the memory card in the
JPEG format.
Chapter 8
62 HP PSC 2350 series all-in-one
Scan