HP PSC 2350 All-in-One Printer - Manual (Page 46)

Setting Description
5. Layout Style Lets you select one of three layout styles for the current
print job.
The
Paper Saver layout fits as many photos on the
paper as possible, rotating and cropping photos if
necessary.
The
Album layouts keep the orientation of the original
photos. Album (Portrait Page) and Album (Landscape
Page) refer to the orientation of the page, not the photos
themselves. Some cropping might occur.
6. Smart Focus Lets you enable or disable automatic digital sharpening
of photos.
Smart Focus affects only printed photos. It
does not change the appearance of photos on the color
graphics display or the actual image file on the memory
card.
Smart Focus is enabled by default.
7. Digital Flash Lets you make dark photos appear lighter. Digital Flash
affects only printed photos. It does not change the
appearance of photos on the color graphics display or
the actual image file on the memory card.
Digital Flash
is turned off by default.
8. Set New Defaults Lets you save the current Print Options settings as the
new defaults.
Change print options
You change each of the Print Options menu settings in the same general way.
1 In the Photo area, press Photo Menu , 1 , and then press the number next to the
setting you want to change. You can scroll through the Print Options menu by
pressing on the control panel to see all the options.
The currently selected option is highlighted, and its default setting (if any) appears
below the menu, at the bottom of the color graphics display.
2 Make the change to the setting, and then press OK .
Note In the Photo area, Photo Menu again to exit the Print Options menu and
return to the photo display.
For information on setting default photo print options, see Set new photo print options
defaults .
Set new photo print options defaults
You can change the photo print options defaults from the control panel.
1
In the Photo area, press Photo Menu , and then press 1 .
The Print Options menu appears.
2 Make changes to any options as needed.
User Guide 43
Memory
Card and PictBridge