HP PSC 2350 All-in-One Printer - Manual (Page 41)

The slots are configured as follows (from top to bottom):
●
SmartMedia, xD-Picture Card (fits in top right of the slot)
● Memory Stick, Magic Gate Memory Stick, Memory Stick Duo (with user-supplied
adapter), Memory Stick Pro
● CompactFlash (I, II )
● Secure Digital, MultiMediaCard (MMC)
● Camera port (below the memory card slots): compatible with any USB-equipped
digital camera that supports PictBridge
Note The camera port only supports USB-equipped digital cameras that support
PictBridge. It does not support other types of USB devices. If you attach a USB
device that is not a compatible digital camera to the camera port, an error
message appears on the color graphics display. If you have an older HP-brand
digital camera, try using the USB cable that came with the camera. Plug it into
the USB port on the back of the HP all-in-one and not into the camera port near
the memory card slots.
Tip By default, Windows XP will format a memory card of 8 MB or less and 64 MB or
more with the FAT32 format. Digital cameras and other devices use the FAT
(FAT16 or FAT12) format and cannot operate with a FAT32 formatted card. Either
format your memory card in your camera or select FAT format to format your
memory card in a Windows XP PC.
Transfer photos to your computer
After you take photos with your digital camera, you can print them immediately or save
them directly to your computer. To save them to your computer, you need to remove the
memory card from the camera and insert it in the appropriate memory card slot on the
HP all-in-one.
Note You can only use one memory card in your HP all-in-one at a time.
To use a memory card
1 Insert the memory card into the appropriate slot on your HP all-in-one.
When the memory card is inserted correctly, the status light next to the memory
card slots begins to blink.
Reading photos... appears on the color graphics
display. The status light next to the memory card slots blinks green when the card
is being accessed.
If you insert a memory card incorrectly, the status light next to the memory card
slots blinks amber and the color graphics display shows an error message such as
Card is in backwards or Card is not fully inserted .
Warning Never attempt to remove a memory card while it is being
accessed. Doing so can damage files on the card. You can safely remove a
card only when the status light next to the slots is not blinking.
2 If there are photo files on the memory card that have never been transferred
before, a dialog box on your computer asks whether you want to save the photo
files to your computer.
3 Click the option to save.
Chapter 6
38 HP PSC 2350 series all-in-one
Memory
Card
and
PictBridge