HP LaserJet 4345 Multifunction Printer series User Manual
Page 139
Note
Each time you change the operating mode, the MFP restarts.
To select the operating mode at the control panel
1. Touch Menu.
2. Scroll to and touch CONFIGURE DEVICE.
3. Scroll to and touch MBM-3 CONFIGURATION.
4. Touch OPERATION MODE. Select the operation mode that you want to use.
5. Touch OK.
To select the operating mode in the printer driver (Windows)
1. Access the printer-driver properties. For instructions, see
. Look
for the column with the heading "To change the configuration settings," and follow the
procedure for the operating system that you are using.
2. You can configure the mode automatically or manually:
a. Automatic configuration: Next to Automatic Configuration, select Update Now.
b. Manual configuration: Select the operation mode from the list of options for
Accessory Output Bin or Optional Paper Destinations (depending on your
operating system).
To select the operating mode in the printer driver (Mac OS 9)
1. Access the printer-driver properties. For instructions, see
. Look
for the column with the heading "To change the configuration settings," and follow the
procedure for the operating system that you are using.
2. In the Change pop-up menu, select Accessory Output Bins.
3. In the To: pop-up menu, click HP 3-bin mailbox.
4. In the Change pop-up menu, select Mailbox mode.
5. In the To: pop-up menu, select the mode that you want to use.
6. Click OK.
To select the operating mode in the printer driver (Mac OS X)
1. Access the printer-driver properties. For instructions, see
. Look
for the column with the heading "To change the configuration settings," and follow the
procedure for the operating system that you are using.
2. In the Accessory Output Bins pop-up menu, select HP 3-bin mailbox.
3. In the Mailbox mode pop-up menu, select the mode that you want to use.
4. Click Apply changes.
To assign an output bin to a user or a group of users when using
Mailbox mode (Windows)
Perform the following procedure for each user or group of users.
1. Open the printer driver. See
.
2. On the Output tab, select the appropriate output bin, and then click OK.
ENWW
3-bin mailbox
125