HP LaserJet 4345 Multifunction Printer series - Manual (Page 69)

Item Values Explanation
JAM RECOVERY AUTO*
ON
OFF
Determine how the MFP
functions when a jam occurs.
AUTO: The MFP automatically
selects the best mode for jam
recovery (usually ON). This is
the default setting.
ON: The MFP automatically
reprints pages after a jam is
cleared.
OFF: The MFP does not reprint
pages following a jam. Printing
performance might be
increased with this setting.
LANGUAGE List of available languages Sets the language of the
control panel.
Copy/send settings
This table lists the options that are available for the COPY/SEND SETTINGS, which are part
of the SYSTEM SETUP submenu.
Values Explanation
INACTIVITY TIMEOUT Defines the amount of time until the copy settings return to the
default settings after any control-panel activity is completed.
AUTO SETTINGS RESET Controls whether copy/send settings revert to default settings
after the defined INACTIVITY TIMEOUT period.
TIMEOUT AFTER SEND Defines the amount of time before the send settings return to the
default settings after any control-panel activity is completed.
HOLD OFF PRINT JOB Prevents network print jobs from starting within a specified period
after a copy is completed.
HOLD OFF TIME Defines the amount of time that print jobs must wait if HOLD OFF
PRINT JOB is set to ON.
SCAN AHEAD Allows a copy job to be scanned even if the MFP is printing
another job. The job will be scanned and held until it can be
printed. If this setting is set to OFF, the job is not scanned until the
print job is completed.
AUTO JOB INTERRUPT Allows a copy job to automatically interrupt any currently printing
network print job. The copy job is placed between full copies of
the job that is currently printing. If this setting is set to OFF, the
job is not printed until all copies of the print job are completed.
COPY JOB INTERRUPT Allows you to interrupt the current copy job to make a different
copy. When you press the
S
TART
button, the MFP shows a
message that asks if you want to interrupt the current copy job.
ENWW Configure device menu 55