HP LaserJet 4345 Multifunction Printer series User Manual
Page 67
Item
Values
Explanation
SLEEP DELAY
1 MINUTE
15 MINUTES
30 MINUTES
60 MINUTES*
90 MINUTES
2 HOURS
4 HOURS
Sets how long the MFP
remains idle before it enters
sleep mode.Using sleep mode
offers the following advantages::
●
Minimizes the amount of
power that the MFP
consumes when it is idle
●
Reduces wear on
electronic components in
the MFP
Note
Sleep mode turns off the
backlight on the display, but the
display is still readable.
The MFP automatically exits
sleep mode when you send a
print job, receive a fax, touch
any button on the control panel,
touch any part of the
touchscreen, open the scanner
lid, or load media into the ADF.
To enable or disable sleep
mode, see
WAKE TIME
List of days of the week
Sets the time that the MFP
automatically comes out of
sleep mode. This feature can
be set for a different time for
each day of the week.
COPY/SEND SETTINGS
For information about these
settings, see the separate table
PERSONALITY
AUTO*
PCL
PS
XHTML
MIME
Select the default MFP
language (personality).
Possible values are determined
by which valid languages are
installed in the MFP.
Normally you should not
change the product language
(the default is AUTO). If you
change the setting to a specific
product language, the MFP
does not automatically switch
from one language to another
unless specific software
commands are sent to the MFP.
ENWW
Configure device menu
53