HP e-Commerce Server Accelerator sa7120 - Manual (Page 136)

C H A P T E R 8 HP e-Commerce Server Accelerator SA7100/SA7120 User Guide
126
Before
Upgrading Monitoring output data can interfere with import/
export operations
If import or export operations are carried out while any of the
device’s monitors are enabled, the monitors’ periodic output will be
inserted into the data flow of the import or export. Workaround:
Before performing an import or export operation, turn off all
monitors:
HP SA7120> set monitoring disable
Details on the device’s monitoring functions are found in Chapter 6.
IP blocks may not persist across software upgrade
The device may, after the automatic reboot following an import
upgrade, experience a problem with reestablishing any IP blocks
created before the upgrade. If this is the case, the console displays a
message similar to either of the following examples:
Upgrading...
System rebooting...09/20 13:41:43 Build 122 Tue
Sep 19 02:40:36 PDT 2000 09/20 13:41:44 "block
9.8.7.6 255.255.255.255 99 0xffff" is incomplete
and ignored
Warning: "ciphers ALL:!ADH:!EDH" at line # 11
ignored.
Warning: "block 9.8.7.6 255.255.255.255 99
0xffff" at line # 30 ignored.
Do you want to install this config ? [y]:
Use the create block command to recreate any desired IP blocks after
the upgrade is complete:
HP SA7120> create block
Client IP to block [0.0.0.0]:<n.n.n.n>
Client IP mask [0.0.0.0]:<n.n.n.n>
Server IP to block [0.0.0.0]:<n.n.n.n>
Server IP mask [0.0.0.0]:<n.n.n.n>
Server Port to block:<nn>
Server Port mask [0xffff]:
HP SA7120>