HP e-Commerce Server Accelerator sa7120 - Manual (Page 49)

C H A P T E R 4 Scenario 2—Multiple Servers
39
Map Net Ser Cipher Re- Client
ID KeyID Server IP Port Port Suites direct Auth
== ===== ========= ==== ==== ============ ====== ====
1 default Any 443 80 all(v2+v3) n n
2 myserver 10.1.1.30 443 80 med(v2+v3) n n
3 myserver2 10.1.1.31 443 80 med(v2+v3) n n
HP SA7120>
6. After you have manually created a mapping, the default
mapping can be deleted. In this case, delete MapID number 1.
MapID number 2 becomes MapID number 1 when the default is
deleted.
HP SA7120> delete map 1
HP SA7120> list map
Map Net Ser Cipher Re- Client
ID KeyID Server IP Port Port Suites direct
Auth
== ===== ========= ==== ==== ====== =====
====
1 myserver 10.1.1.30 443 80 med(v2+v3) n n
2 myserver2 10.1.1.31 443 80 med(v2+v3) n n
HP SA7120>
7. To configure a third or fourth web server to operate with the
SA7100/SA7120, repeat the steps above, specifying a different
IP address for each server.
8. Save the configuration when mapping is completed for the
server(s).
HP SA7120> config save
Saving configuration to flash...
Configuration saved to flash
HP SA7120>