HP e-Commerce Server Accelerator sa7120 - Manual (Page 52)

C H A P T E R 4 HP e-Commerce Server Accelerator SA7100/SA7120 User Guide
42
<Enter>
Use Ctl-X to cancel upload
13. Select Send from the HyperTerminal* Transfer menu.
14. Type or use the Browse button to specify the file to send.
15. Select xmodem as the sending protocol.
16. Click the Send button. The transfer completes and then you are
prompted to verify that you want to install this configuration.
Do you want to install this config ? [y]:
17. After verification (y) or refusal (n), the prompt reappears.
HP SA7120>
18. Change Device 2’s IP address using the set ip command.
HP SA7120> set ip
Enter IP Address (’none’ to delete) [10.1.2.65]:
1.1.1.1
Enter Netmask (’none’ to delete)
[255.255.255.0]: 2.2.2.2
19. Save the configuration.
HP SA7120> config save
Saving configuration to flash...
Configuration saved to flash
HP SA7120>
20. Press the Bypass button on Device 2’s front panel to put the
machine in inline mode.
21. Repeat steps 11-20 for any additional SA7100/SA7120s. On the
last SA7100/SA7120 in the chain, disable spilling with the set
spill disable command.