HP e-Commerce Server Accelerator sa7120 - Manual (Page 145)

A P P E N D I X A Front Panel LEDs
135
Overload
ON – SA7100/SA7120 is saturated with SSL requests. LED ranges
from dim flickering to bright steady, indicating low to high spillover.
Refer to the spill command for ways to offload requests to another
SA7100/SA7120.
OFF – Normal operation.
Activity
ON – SSL processing is being performed. Ranges from dim, when
processing loads are low to bright, when greater amounts of processing
are occuring.
OFF – No SSL processing is being performed.
Network Link
ON – Operational network connection.
OFF – No operational network connection.
Inline
(See Appendix B, Failure/
Bypass Modes)
BLINKING GREEN – Fail-safe mode, which is the default. In the event
of a SA7100/SA7120 failure, traffic will not pass through.
STEADY GREEN – Fail-through mode, which allows traffic to pass
even with SA7100/SA7120 failure.
OFF – SA7100/SA7120 is not operational, or is in Bypass mode.
Server Link ON – Operational server connection.
OFF – No operational server connection.
LED Status