HP e-Commerce Server Accelerator sa7120 - Manual (Page 83)

C H A P T E R 5 Command Reference
73
Remote
Management
Commands
Command Description
list procs List all processes associated with the CLI and remote management
commands (inetd, telnetd, sshd2, and snmpd).
Example:
HP SA7120> list procs
PID: 40 PROG: cli
PID: 41 PROG: cli
HP SA7120>
set ip Assign an IP address and netmask to the SA7100/SA7120’s
network interface for Telnet and SSH sessions.
CAUTION: The assignment of an IP address introduces security
issues. Please refer to the “Access Control” section of Chapter 6.
NOTE: To disable a currently configured IP, use set ip followed
by none.
Example:
HP SA7120> set ip
Enter IP Address (’none’ to delete)
[10.1.2.124]:
Enter Netmask [255.255.0.0]:
set
max_remote_sessions Set the maximum allowed number of concurrently running Telnet
and SSH sessions.
Syntax:
HP SA7120> set max_remote_sessions <0-5>
where <0-5> is the maximum number of remote sessions you
want to allow. Default: 5.